43 records found.
| Title |
Bulletin No. |
Author(s) |
|---|
| Technical Position on Criteria Establishment ; Technical Position on Damping Values for Piping-Interim Summary Report ; Technical Position on Response Spectra Broadening ; Technical Position on Indu |
300 |
|
| Technical Position on Piping system Installation Tolerances ; Technical Position on Damping Values for Insulated Pipe – Summary Report |
316 |
E.B. Branch, N. Kalyanam, D.F. Landers, E.O. Swain and D.A. Van Duyne ; J.L. Bitner, S.N. Hou, W.J. Kagay and J.A. O’Brien |
| Technologies For The Evaluation Of Non-Crack-Like Flaws In Pressurized Components -- Erosion/Corrosion, Pitting, Blisters, Shell Out-Of-Roundness, Weld Misalignment, Bulges And Dents |
465 |
D. A. Osage, P. Krishnaswamy, D. R. Stephens, P. Scott, R. Mohan, J. Janelle, G. M. Wilkowski |
| Ten Years Of Progress In Pressure Vessel Research |
45 |
F.L. Plummer, R.D. Stout, E. Wenk, Jr. and I.E. Boberg |
| Test of Torispherical Pressure Vessel Heads Convex to Pressure; Reference Stress Concepts for Creep Analysis |
227 |
C.E. Washington, R.J. Clifton and B.W. Costerus; H. Kraus |
| Test Protocol for Gasket Materials |
495 |
Jerry Waterland |
| Testing Of Stainless-Steel Weldments |
18 |
H. Thielsch |
| Testing Pressure Vessels Effect Of Welding On Pressure Vessel Steels |
4 |
F.G. Tatnall A.F. Scotchbrook, L. Evril, R.D. Stout, and B.G. Johnston |
| Tests of Bolted Beam-to-Column Flange Moment Connections |
218 |
K.F. Standig, G.P. Rentschler and W.F. Chen |
| Tests Of Columns Under Combined Thrust And Moment |
8 |
L.S. Beedle, J.A. Ready and B.G. Johnston |
| Tests On The Stability Of Welded Steel Frames Tests On The Stability Of Welded Steel Frames |
81 |
L.-W. Lu, Y.-C. Yen, L.-W. Lu and G.C. Driscoll, Jr. |
| The Crack Arrest Properties of 9% Nickel Steels for Cryogenic Applications |
278 |
R.D. Stout and A.W. Pense |
| The Design Of Thick-Walled Closed-Ended Cylinders Based On Torsion Data |
94 |
B. Crossland |
| The Dynamic Deformation of Piping |
321 |
J.L. McLean, P.K. Beazley and A.H. Manhardt |
| The Effect Of Crack Depth To Specimen Width Ratio On The Elastic-Plastic Fracture Toughness Of A High-Strength Low-Strain Hardening Steel |
358 |
J. A. SMITH AND S. T. ROLFE |
| The Effect of Post Weld heat Treatment and Notch Toughness on Welded Joints and on Normalized Base-Metal Properties of A-516 Steel |
481 |
Ken Orie and Elmar Upitis |
| The Effects Of Internal Pressure On Thin-Shell Pressure Vessel Heads Wrinkling Of A Large Thin Code Head Under Internal Pressure Biaxial Stress Criteria For Large Low-Pressure Tanks |
69 |
E.O. Jones, Jr. with Discussion by L.P. Zick, A. Fino and R.W. Schneider, J.J. Dvorak and R.V. McGrath |
| The External Pressure Collapse Tests of Tubes |
284 |
E. Tschoepe and J.R. Maison |
| The Fabrication and Welding of High-Strength Line-Pipe Steels |
161 |
H. Thomasson |
| The Fabrication of Dissimilar Metal Joints Containing Reactive and Refractory Metals |
210 |
M.M. Schwartz |
| The Fracture Behavior of A588 Grade A and A572 Grade 50 Weldments ; Effects of Long-Time Postweld Heat Treatment on the Properties of Constructional-Steel Weldments |
330 |
C.V. Robino, R. Varughese, A.W. Pense and R.C. Dias ; P.J. Konkol |
| The Influence Of Consumable Composition And Solidification On Inclusion Formation And Growth In Low Carbon Steel Underwater Wet Welds |
399 |
A. Sanchez-Osio and S. Liu |
| The Influence of Multiaxial Stress on Low-Cycle Fatigue of Cr-Mo-V Steel at 1000oF |
264 |
R.H. Marloff and R.L. Johnson |
| The Influence Of Residual Stress On The Strength Of Structural Members |
44 |
R.L. Ketter |
| The Measurement of Delta Ferrite In Austenitic Stainless Steels |
132 |
R.B. Gunia and G.A. Ratz |
