111 records found.
| Title |
Bulletin No. |
Author(s) |
|---|
| 3D Stress Criteria Guidelines For Application |
429 |
J. L. Hechmer and G. L. Hollinger |
| A Literature Review on Characteristics of High Temperature Ferritic Cr-Mo Steels and Weldments |
454 |
Carl D. Lundin |
| A New Design Criterion Based On Pressure Testing Of Torispherical Heads |
414 |
A. Kalnins and M.D. Rana |
| A Review Of Methods For The Analysis Of Buried Pressure Piping |
425 |
G. Antaki |
| A Synthesis Of The Fracture Assessment Methods Proposed In The French RCC-MR Code For High Temperature |
440 |
D. Moulin, B. Drubay and L. Laiarinandrasana |
| An Experimental Investigation Of Open-Web Beams |
47 |
A.A. Toprac and B.R. Cooke |
| An Experimental Study Of Causes And Repair Of Cracking Of 1¼Cr-½Mo Steel Equipment |
411 |
C.D. LUNDIN, P. LIU, C.Y.P. QIAO, G. ZHOU, K.K. KHAN AND M. PRAGER |
| Assessment, Sample Problems And Commentary On Design Of Section III, Div. 3 (NUPACK) Of The ASME Boiler And Pressure Vessel Code |
437 |
T. M. Adams |
| Behavior Of Bellows |
466 |
C. Becht, IV |
| Bibliography Of The Welding Research Supplements Of The Welding Journal From 1950-1996 |
424 |
Compiled by Robert La Pointe |
| Bolted Flange Assembly: Preliminary Elastic Interaction Data And Improved Bolt-Up Procedures |
408 |
G. BIBEL AND R. EZELL |
| Buckling Criteria For Torishperical Heads Under Internal Pressure |
444 |
C. D. Miller |
| Challenges and Solutions in Repair Welding for Power and Processing Plants – Proceedings of a Workshop |
412 |
|
| Characterization Of Thermo-Mechanical Fatigue Response Of SS-316 Structures |
467 |
S. Y. Zamrik, L. C. Firth, M. L. Renauld, D. Davis |
| Commentary On The Alternative Rules For Determining Allowable Compressive Stresses For Cylinders, Cones, Spheres And Formed Heads For Section VIII, Divisions 1 And 2 |
462 |
C. D. Miller |
| Constraint Effects On Fracture Behavior: I) The Effect Of Crack Depth (a) And Crack-Depth To Width Ratio (a/W) On The Fracture Toughness Of A533-B Steel ; II) An Analytical Investigation Of The Effect |
418 |
J.A. Smith and S.T. Rolfe |
| Crack-Starter Weld Bead Deposition for ASTM E-208 Drop-Weight Testing: Part I) Qualification of Electrodes for the Crack-Starter Based on P-2 Type Drop-Wight Specimen -ASTM E-208-95a; Part II) Deter |
469 |
Carl D. Lundin, Peng Liu, Songquin Wen, Ralph Edwards, Raymond Bellamy |
| Creep Crack Growth Behavior In Weld Metal/Base/Metal/Fusion Zone Regions In Chromium Molybdenum Steels |
416 |
R.H. Norris and A. Saxena |
| Creep Crack Growth: Assessment of Defects in High Temperature Components |
483 |
Ashok Saxena and Kee Bong Yoon |
| Creep-Fatigue Damage Assessment In Type 316 Stainless Steel Under Uniaxial And Multiaxial Strain Cycling At 1150°F |
402 |
S. Y. Zamrik and M. Mirdamadi |
| Damage Mechanisms Affecting Fixed Equipment in the Fossil Electric Power Industry |
490 |
Jonathan D. Dobis, David N. French |
| Damage Mechanisms Affecting Fixed Equipment in the Pulp and Paper Industry |
488 |
Jonathan D. Dobis, David C. Bennett |
| Damage Mechanisms Affecting Fixed Equipment in the Refining Industry |
489 |
Jonathan D. Dobis, J.E. Cantwell, Martin Prager |
| Design And Inservice Margins Of Power Piping Systems: A Comparative Study Of U. S., Canadian And European Codes & Standards |
434 |
George A. Antaki |
| Design And Repair Of Buried Pipe |
446 |
George A. Antaki |
